XENIA 15 KC GAMING NOTEBOOK

XENIA 15 KC GAMING NOTEBOOK

The image is not permanent. Please refer to the official Intel® NUC laptop image retention removal guide for help.

Image Retention / Burn-in On the Intel® NUC Laptop Kits

XPG XENIA 15 KC has a battery protection design to prevent the loss of battery life over time due to constant charging and discharging cycles, in order to help lengthen the lifespan of your notebook. 

 

In case the adapter is being plugged in when battery capacity is already over the default 90% value, the system will prevent charging the battery further. If you want to charge your battery up to 100%, please plug your AC when the battery is below 90% capacity.

 

Users can set different battery charging limits for their notebook by using Intel® NUC Software Studio that comes preinstalled with all Xenia 15 KC notebooks. 

 

If your notebook stops charging even when the battery has fallen below 90%, check the battery charge limit setting in the Intel® NUC software studio as indicated in the sample picture below for any manual setting change. 

If you have uninstalled Intel® NUC Software Studio, you can still download it separately from XPG Xenia 15 KC download page.

 

In a quiet environment and in specific ambient conditions, a high-pitched sound may occur due to the vibrations and friction of power components on the circuit board. This high-pitched sound is a normal physical phenomenon and does not affect your notebook's safety and performance.

The XENIA 15 KC draws fresh air from inlets located at the bottom of the unit, and expels hot air at the sides and rear, just like the vast majority of Portable PCs. 

 

To ensure efficient heat dissipation, we suggest to avoid placing the XENIA 15 KC on a soft surface and to provide ample space for airflow so your XENIA 15 KC can ventilate properly.

 

Failure to do so will cause fans to spin longer and louder, and may cause performance degradation or even system shutdown for overheat protection in extreme cases.

XENIA 15 KC comes with 15.6-inch QHD (2560 x 1440) , 165Hz matte IPS and 300 nits panel that delivers striking gaming visuals. The 85% screen ratio, 4.9mm narrow bezel and 100% sRGB color gamut provide boundless vision with a stunningly immersive experience. You can smoothly opened your laptop with just one hand. 

XENIA 15 KC’s per-key RGB keyboard is specially designed for gamers. The spacious optical-mechanical switch, 2mm short key travel and just 0.2ms ultra-low latency made your fingers fly through and win every battlefield. With 50 million key presses lifecycle, silent and tactile keystroke and anti-ghosting design, you can fast sneak attack every enemy you encounter.

The XPG XENIA 15 KC was initially launched in the USA and Latin America (including Mexico). As production continues, this product will be made available in other countries/regions over time.

It comes with a 1-year warranty. (the warranty may vary by regions).

XPG XENIA 15 KC comes with three preset performance modes that can be further customized through INTEL NUC STUDIO software for a personalized operation that fits your user scenario the best. These modes can be quickly and easily switched with the dedicated QUICK MODE BUTTON next to the POWER ON button. 

XPG XENIA 15 KC's default Windows 10 image was kept as clean as possible with no bloatware and the absolute minimum number of necessary configuration applications. Aside from Windows 10 and drivers, the only additional software included are a set of preloaded XPG wallpaper, Intel NUC Studio and Intel NUC Audio software. All systems are factory activated. As the OS comes standard with Xbox Game Pass for PC, XPG provides one free month of the service for first time subscribers. Please note the month of service does not start until you manually activate your subscription.

Spare power adapters will be available to purchase from the XPG Online Store soon. XPG also offers a lineup of backpacks that are great for transporting your notebook and any other gear you need to bring when you travel. 

XPG also offers a number of high-quality peripherals such as headsets and mice.

XPG XENIA 15 KC can operate for up to 7 hours in Battery Saver mode when WIFI is turned off and luminosity is set to low. Depending on the settings and usage scenario, your actual battery life may vary. 

Wi-Fi 6 is the latest generation of wireless protocol that delivers greatly reduced latency (up to 75% reduction) when connecting and increased gigabit speeds up to ~1700 Mbps. 

To take full advantage of this new technology, make sure to use a compatible wireless router that supports 802.11ax and 160Mhz channel bandwidth. Those speeds may vary greatly based on local traffic, your ISP’s local capability, and the wireless router itself. 

XPG XENIA 15 KC can connect to up to two external displays. One via HDMI port and one more via Thunderbolt 4 port. This can be further expanded by connecting a Thunderbolt hub with multiple display outputs. 

Every thermal solution will face performance degradation over time. Our liquid metal solution is installed per industry standards and has been designed to offer superior performance and longevity compared to standard thermal paste and is covered to outlast the warranty period. 

The XPG XENIA 15 KC comes with a preinstalled 1TB high performance XPG GAMMIX S70 M.2 2280 SSD (PCIe Gen 4). Users can expand the storage by purchasing a new M.2 2280 SSD and installing on the spare M.2 PCIe Gen 3 slot or even replace the preinstalled SSD. The preinstalled 16GB x 2 hand sorted dual rank dual channel XPG SO-DIMM memory offer great performance, but can also be replaced to expand up to 64GB of memory.

Dual Rank memory can improve data throughput of 20% to 40% reducing CPU workload and lowering latency, which creates more headroom for an additional burst in performance or for decreased temperatures when less cycles are wasted waiting for memory. 

XPG XENIA 15 KC comes pre-installed with an award winning XPG Gammix S70 1TB SSD which boasts some of the best speeds available at the time of launch. Many other systems may still come equipped with PCI Gen 3 or slower frequencies SSDs, while Xenia 15 KC offers the pinnacle of XPG SSD Research and Development

All Xenia laptops are pre-activated at the factory during production. There is a known Microsoft issue that has been resolved when running by updating to the latest Cunulative Update via Windows Update function from Control Panel. 

According to the definition of Power Delivery, the output of Type-C must be 10-100W. Notebooks with Thunderbolt 3 or higher specifications can support 5V/3A PD charging.

 For detailed information about upgrading to Windows 11, please visit the Microsoft Website.

 

1. السياسة العامة لضمان المنتجات

1-1 أجهزة الكمبيوتر المحمول XPG Xenia مغطاة بضمان محدود لمدة عام واحد، بدءًا من تاريخ الشراء. في حالة شراء جهاز كمبيوتر محمول في بلد أو منطقة تتطلب قانونًا فترة ضمان أطول يجب على XPG توفير خدمات ضمان لمدة أطول لهؤلاء العملاء حسب القانون.

1-2 بصرف النظر عن الضمانات المطولة فإن بطاريات ومحولات التيار المتردد وشاشات LCD لأجهزة الكمبيوتر المحمول XPG مغطاة بضمان محدود لمدة عام واحد يبدأ من تاريخ الشراء، وذلك نظرًا لطبيعة هذه المكونات الاستهلاكية.

1-3 على الرغم من اختبار لوحات LCD وفحصها بدقة للتأكد من جودتها في المصنع فقد تظهر مع مرور الوقت عيوب بكسلة نظرًا لطبيعتها الفيزيائية. حسب معايير تصنيع اللوحة يمنح هذا الضمان المحدود ما يصل إلى ثلاثة وحدات بكسل ساطعة غير متجاورة، وما يصل إلى خمسة وحدات بكسل سوداء غير متجاورة، مما يعني أنه لا يوجد أكثر من ثمانية وحدات بكسل معيبة أثناء التشغيل العادي. لذلك بموجب الضمان لمدة عام واحد يتم استبدال لوحة LCD فقط إذا تجاوز عدد البكسل المعيب الحد المسموح به أعلاه. 

1-4 البرامج المثبتة مسبقًا

لا يشمل هذا الضمان البرامج والملحقات الأخرى التي قد تصاحب المنتج، ولكن يشملها بقبول اتفاقية ترخيص المستخدم النهائي لكل تطبيق برمجي قبل الاستخدام.

1-5 الأجزاء القابلة للاستبدال من قبل المستخدم

قد تسمح معظم تصميمات جهاز XPG المحمول بإضافة مكونات قياسية كمحركات أقراص SSD إضافية ووحدات الذاكرة (في طرازات معينة فقط)، أو استبدالها من قبل المستخدم النهائي. بينما توصي XPG بشدة باستخدام المكونات التي تم التحقق من صحتها لتثبيتها في أجهزة كمبيوتر XPG المحمولة لتجنب وقوع أمور غير متوقعة، نظرًا للطبيعة المفتوحة لتصميم الكمبيوتر الشخصي ولتلبية رغبات عملائنا، لن تبطل ضمانات XPG في حالة استخدام قطع غيار لم يتم التحقق من صحتها من قبل XPG. ومع ذلك، في حالة ما إذا قرر المستخدم استبدال القطع فقد تطبق القيود التالية:

(1)   لن تكون XPG مسؤولة عن مشكلات عدم التوافق أو أي ضرر ناتج عن التغيير، ومن ذلك مثلا إذا لم يتم تركيب حشوة حرارية لمحرك أقراص SSD جديد، أو لم يتم التلامس بشكل صحيح، مما أدى إلى انبعاث حرارة أو تلف القطعة، أو إذا أتلفت القطعة الجديدة اللوحة الموجودة.

(2)   لن تضمن XPG أن القطعة الذي لم يتم التحقق من صحتها تؤدي نفس مستوى الأداء المعلن عنه أو نفس عمر بطارية الجهاز.

(3)   يغطي ضمان XPG فقط العيوب التي تقتصر على التصميم القياسي للجهاز حسب تصنيعه وداخل فترة الضمان الأصلية المذكورة أعلاه.

(4)   لن تتحمل XPG المسؤولية عن فقد البيانات بعد تركيب القطع البديلة. ومع ذلك، يمكن للعملاء دائمًا طلب الحصول على صورة التصنيع الأصلية التي تم شحن الجهاز بها في الأصل عن طريق فتح طلب في نظام RMA، أو طلب ذلك من موفر الخدمة المحلي في منطقتك، إذا تم شحن البرامج الأصلية المرخصة مع المكونات التي تم شراؤها.

2.Warranty Service

2.1 Subject to the terms and conditions hereunder, XPG provides, without any charges or fees, replacement or repair services to our customers for defective Products within the applicable warranty term (hereinafter referred to as “Warranty Service”). The warranty term commences from the original purchase day. If Warranty Service is needed, any documentation which is able to prove the original purchase day should be provided. If the original purchase day cannot be determined, the commencement of the warranty term will be determined by XPG according to the Product serial number.

 

2.2 Please contact the local reseller where the purchase was made for help. Or you may, at your option, make a Warranty Service Request on ADATA’s RMA service webpage. Through your request on the webpage, XPG will provide Warranty Service from XPG headquarter. In this case, the cost of transportation and relevant insurance for the delivery of the Product to XPG shall be borne by you, and XPG shall cover the cost of all other transportation and relevant insurance when returning the Product back to you after Warranty Service completion.

 

2.3 Please note that:
(1) XPG may replace the defective Product with a spare product from stock as in lieu of repairing the Product, and after replacement, XPG may at its sole option dispose of defective Products. Therefore, in this case, the repaired Products you receive may not be the original Products you sent for Warranty Service, and the original Product will not be returned back to you as well.
(2) In the event that production of the Product has been discontinued or factory repair service is no longer provided, XPG will, at its sole discretion, offer a substitute in equivalent level or class for such Product instead.

3.Scope of Warranty and Disclaimer

3.1 This Warranty does not apply to defects or damages to Products caused by human error-related factors or any other non-ordinary factors, including but not limited to :
(1) Malfunctions or damages caused by force majeure such as natural calamity or any inappropriate use by any person.
(2) Product has been repaired or taken apart by unauthorized technicians.
(3) Warranty label is altered, damaged or missing.
(4) Product serial number does not conform to XPG’s records, or is difficult to ascertain.
(5)   Please note the warranty does not cover standard wear and tear or user errors.

 

Exception of warranty

3.2 NEVER does this Warranty apply to the recovery or back-up on any digital data in the Product. XPG does not guarantee the completeness of digital data stored in the Product during and after Warranty Service, and is not liable for any damages or losses of digital data stored in repaired Products. Furthermore, XPG shall in no event be liable for, during the delivery of the Product, any damages to the Product and any losses of digital data stored in Products. Consequently, before sending the Product to XPG for Warranty Service, if it is equipped with storage function, it is suggested that you make a back-up of your digital data from the Product and remove those digital data from the Product.

 

3.3 To the extent that applicable laws or regulations allow, in no event shall XPG be liable, under this Warranty, for any losses of profit, anticipated savings and digital data, or indirect, incidental or consequential losses or damages caused by Products.

 

3.4 XPG manufactures consumer and business-class Products. Since Products are not designed for extreme precision technology or absolute safety applications, it is not recommended to apply the Products in life support machines or other emergency equipment, which may lead to personal injury or death if such equipment is defective or suffeers a breakdown, including but not limited to medical or medical-related equipment, military or military-related equipment, aircraft, traffic control equipment, disaster prevention systems, combustion control system, nuclear energy system, and so forth. XPG shall not be liable for any personal injury or death, or any loss or damages to property arising from such kind of application mentioned above.

 

3.5 XPG makes no other warranties, including any warranty of merchantability or fitness for a particular purpose, whether expressly or impliedper the Products. In the event that any law or regulation of a particular country/region prohibits the exclusion of implied warranty (i.e. warranty of merchantability and fitness), the terms of XPG’s implied warranty shall be subject to such laws/regulations or the Warranty term hereunder, whichever is shorter.

3.6   Counterfeit products are NOT covered by this or any XPG warranty. Counterfeit products are any products that XPG, at its sole discretion, determines were not manufactured by XPGor any of its authorized manufacturing partners. Counterfeit products will be reported for investigation and will NOT be returned.

3.7  Obsolete or Discontinued Products An obsolete or discontinued product will be replaced by the same product if it is available. If the same product is unavailable, XPG will replace the obsolete or discontinued product with a product of similar function and capacity.

3.8  Certified Refurbished Products All certified refurbished products have a 90-day, replacement-only warranty.

3.9  European Union Exceptions
(1) In the European Union, the minimum warranty period provided by resellers is 2 years; local country regulations are applicable.
(2) The minimum warranty period for refurbished products is 1 year; local country regulations are applicable.
(3) For consumer transactions in certain jurisdictions, including but limited to, the European Union, Australia and New Zealand. The limited terms contained in this statement, unless legally prohibited, are in addition to the mandatory statutory right applicable to the sale of this XPG product to you in those jurisdictions.