XPGماوس ألعاب ألفا

XPGماوس ألعاب ألفا

يتطلب البرنامج نظام تشغيل Windows 10 أو الأحدث للتشغيل.

يُرجى تجربة الخطوات التالية بالترتيب:

1. إعادة تعيين PRIME إلى الوضع الافتراضي
حرّك الماوس إلى الزاوية العلوية اليمنى لـ XPG PRIME. مرر مؤشر الماوس فوق "مرحبًا أيها الضيف" للكشف عن وظيفة "إعادة التعيين". انقر فوق الزر "إعادة تعيين" لإعادة ضبط برنامج PRIME على الإعدادات الافتراضية.

2. إعادة تعيين لوحة المفاتيح أو الماوس إلى الوضع الافتراضي
لوحة المفاتيح: اضغط مع الاستمرار على FN + ESC لمدة 5 ثوانٍ.
ماوس Slingshot: اضغط مع الاستمرار على زر الأمام + زر الخلف + زر DPI لمدة 5 ثوانٍ.

3. أدخل قائمة الإعدادات وتحقق من كل من البرامج الثابتة للمنتج وإصدارات PRIME. إذا لم يكن أي من البرنامجين الثابتين هو أحدث إصدار متاح، فيُرجى التحديث إلى أحدث إصدار. 

4. إذا استمرت المشكلة، فيُرجى الاتصال بنا وتقديم المعلومات التالية: 
البرامج الثابتة للمنتج وإصدارات PRIME.
صور / مقاطع فيديو للمشكلة.
كيفية إعادة إنتاج المشكلة (السيناريو أو الخطوات). 

When setting all LEDs on XPG ALPHA to white color at its maximum luminosity, all segments of a single LED are turned to maximum, which inevitably consumes 2-3x times more than standard operation in color mode or about 5x times more consumption than keeping LEDs off when operating in wireless mode.

ALPHA mouse battery consumption is calculated based on an average time of continuous drain with LEDs turned on showing a standard colored effect. That translates to charging once to twice a month with average daily use, depending from the effect used. When LEDs are turned off, the 900mAh rechargeable lithium battery can reach over 120 hours of continuous operation in optimal environmental conditions.

On top of the mouse you can find a triangular button that can be used as  DPI button, but there are more:

Preset 6 DPI steps from 400, 800, 1600 ,3200, 6400, and 16000 (max). When switching between each step, a different indicating color serves as a visually notification. And when connected to XPG PRIME software, the lowest DPI step can be adjusted to 100. The number of DPI steps can also be changed ranging from one to six, depending on your preference and gaming habit. 

At the bottom of mouse, right next to the sensor there is a switch that user can choose the connection mode between 2.4G wireless, Bluetooth, or Off. The wireless 2.4G dongle embedded inside the mouse needs to connect to the PC.

XPG PRIME software offers 3 main functions: to set up Lighting, Performance and to determine the power usage preference in Power Status tab. 

- User can quickly change the lighting effect with presets, or advance to more detailed settings such as individual lighting sectors and brightness on the mouse. 

- In the Performance tab, user can decide the number of DPI steps, and the sensitivity of each DPI step. Angle snap, debounce time and polling rate are all available for user to customize.

- In the power status options, gamers can adjust the idle interval time before the mouse enters the sleep mode. The low power warning setting allows gamers to set the percentage of the remaining power themselves so that when the power is in the low power status, the DPI button will be displayed with a red light.

After downloading and installing the software, connect the mouse to PC to begin customization with XPG PRIME software.

1. السياسة العامة لضمان المنتجات

1-1 تخضع ماوسات الألعاب اللاسلكية XPG PRIMERو XPG SLINGSHOT وXPG ALPHA وXPG ALPHA اللاسلكي لضمان لمدة عامين من تاريخ الشراء. 

2.Warranty Service

2.1 Subject to the terms and conditions hereunder, XPG provides, without any charges or fees, replacement or repair services to our customers for defective Products within the applicable warranty term (hereinafter referred to as “Warranty Service”). The warranty term commences from the original purchase day. If Warranty Service is needed, any documentation which is able to prove the original purchase day should be provided. If the original purchase day cannot be determined, the commencement of the warranty term will be determined by XPG according to the Product serial number.

 

2.2 Please contact the local reseller where the purchase was made for help. Or you may, at your option, make a Warranty Service Request on ADATA’s RMA service webpage. Through your request on the webpage, XPG will provide Warranty Service from XPG headquarter. In this case, the cost of transportation and relevant insurance for the delivery of the Product to XPG shall be borne by you, and XPG shall cover the cost of all other transportation and relevant insurance when returning the Product back to you after Warranty Service completion.

 

2.3 Please note that:
(1) XPG may replace the defective Product with a spare product from stock as in lieu of repairing the Product, and after replacement, XPG may at its sole option dispose of defective Products. Therefore, in this case, the repaired Products you receive may not be the original Products you sent for Warranty Service, and the original Product will not be returned back to you as well.
(2) In the event that production of the Product has been discontinued or factory repair service is no longer provided, XPG will, at its sole discretion, offer a substitute in equivalent level or class for such Product instead.

3.Scope of Warranty and Disclaimer

3.1 This Warranty does not apply to defects or damages to Products caused by human error-related factors or any other non-ordinary factors, including but not limited to :
(1) Malfunctions or damages caused by force majeure such as natural calamity or any inappropriate use by any person.
(2) Product has been repaired or taken apart by unauthorized technicians.
(3) Warranty label is altered, damaged or missing.
(4) Product serial number does not conform to XPG’s records, or is difficult to ascertain.
(5)   Please note the warranty does not cover standard wear and tear or user errors.

 

Exception of warranty

3.2 NEVER does this Warranty apply to the recovery or back-up on any digital data in the Product. XPG does not guarantee the completeness of digital data stored in the Product during and after Warranty Service, and is not liable for any damages or losses of digital data stored in repaired Products. Furthermore, XPG shall in no event be liable for, during the delivery of the Product, any damages to the Product and any losses of digital data stored in Products. Consequently, before sending the Product to XPG for Warranty Service, if it is equipped with storage function, it is suggested that you make a back-up of your digital data from the Product and remove those digital data from the Product.

 

3.3 To the extent that applicable laws or regulations allow, in no event shall XPG be liable, under this Warranty, for any losses of profit, anticipated savings and digital data, or indirect, incidental or consequential losses or damages caused by Products.

 

3.4 XPG manufactures consumer and business-class Products. Since Products are not designed for extreme precision technology or absolute safety applications, it is not recommended to apply the Products in life support machines or other emergency equipment, which may lead to personal injury or death if such equipment is defective or suffeers a breakdown, including but not limited to medical or medical-related equipment, military or military-related equipment, aircraft, traffic control equipment, disaster prevention systems, combustion control system, nuclear energy system, and so forth. XPG shall not be liable for any personal injury or death, or any loss or damages to property arising from such kind of application mentioned above.

 

3.5 XPG makes no other warranties, including any warranty of merchantability or fitness for a particular purpose, whether expressly or impliedper the Products. In the event that any law or regulation of a particular country/region prohibits the exclusion of implied warranty (i.e. warranty of merchantability and fitness), the terms of XPG’s implied warranty shall be subject to such laws/regulations or the Warranty term hereunder, whichever is shorter.

3.6   Counterfeit products are NOT covered by this or any XPG warranty. Counterfeit products are any products that XPG, at its sole discretion, determines were not manufactured by XPGor any of its authorized manufacturing partners. Counterfeit products will be reported for investigation and will NOT be returned.

3.7  Obsolete or Discontinued Products An obsolete or discontinued product will be replaced by the same product if it is available. If the same product is unavailable, XPG will replace the obsolete or discontinued product with a product of similar function and capacity.

3.8  Certified Refurbished Products All certified refurbished products have a 90-day, replacement-only warranty.

3.9  European Union Exceptions
(1) In the European Union, the minimum warranty period provided by resellers is 2 years; local country regulations are applicable.
(2) The minimum warranty period for refurbished products is 1 year; local country regulations are applicable.
(3) For consumer transactions in certain jurisdictions, including but limited to, the European Union, Australia and New Zealand. The limited terms contained in this statement, unless legally prohibited, are in addition to the mandatory statutory right applicable to the sale of this XPG product to you in those jurisdictions.